Posts Tagged: construction
RILEM
///RILEM It is an honor to announce this Rilem technical committee DFC supported a workshop on 3D Manufacturing Technologies in Constructions at 21.11.2017 in Delft, focusing on the rapidly developing technologies in the built environment. Due to the limited space,
Ph.D. Thermal Comfort in Sun Spaces by Christian Wiegel
///Ph.D. Thermal Comfort in Sun Spaces by Christian Wiegel Preparation for fossil fuel substitution in the building sector persists as an essential subject in architectural engineering. Since the building sector still remains as one of the three major global end
Ph.D. Thermal Comfort in Sun Spaces by Christian Wiegel
///Ph.D. Thermal Comfort in Sun Spaces by Christian Wiegel Preparation for fossil fuel substitution in the building sector persists as an essential subject in architectural engineering. Since the building sector still remains as one of the three major global end
Ph.D. defense | Christian Wiegel
///Ph.D. defense | Christian Wiegel At 12. October Christian presented his Ph.D. theses “Thermal Comfort in Sun Spaces”, supported by Solarlux. The committee of the TU Rector representative Hans Beunderman, Ulrich Knaack, Tillmann Klein, Thomas Auer, Uta Pottgiesser, Mathias Rudolph,
Ph.D. defense | Christian Wiegel
///Ph.D. defense | Christian Wiegel At 12. October Christian presented his Ph.D. theses “Thermal Comfort in Sun Spaces”, supported by Solarlux. The committee of the TU Rector representative Hans Beunderman, Ulrich Knaack, Tillmann Klein, Thomas Auer, Uta Pottgiesser, Mathias Rudolph,
SHRED WRAPPER
///SHRED WRAPPER IMAGINED BY: Daan Rietbergen, Tillmann Klein, Ulrich Knaack, Holger Strauß, Marcel Bilow IMAGES BY: Marcel Bilow, Soumen Adhikary DATE: 15-05-2009 KEYWORDS: on-site, load-bearing, recycling process, system building, waste In cases of hurricanes and blizzards that devastate entire regions of
SHRED WRAPPER
///SHRED WRAPPER IMAGINED BY: Daan Rietbergen, Tillmann Klein, Ulrich Knaack, Holger Strauß, Marcel Bilow IMAGES BY: Marcel Bilow, Soumen Adhikary DATE: 15-05-2009 KEYWORDS: on-site, load-bearing, recycling process, system building, waste In cases of hurricanes and blizzards that devastate entire regions of
ISM+D annual PhD seminar
///ISM+D annual Ph.D. seminar Each year, the group of PhD´s of the Institute of structural Mechanic and Design ISM+D is meeting to exchange results and development of the individual Ph.D. This year we meet in Trifels – South-West Germany. The
ISM+D annual PhD seminar
///ISM+D annual Ph.D. seminar Each year, the group of PhD´s of the Institute of structural Mechanic and Design ISM+D is meeting to exchange results and development of the individual Ph.D. This year we meet in Trifels – South-West Germany. The
Laminated safety glass interlayers
/// Laminated safety glass interlayers| Mechanical material behavior of polymeric interlayers Miriam Schuster, M.Sc. Teschnische Universität Darmstadt Institute of Structural Mechanics and Design
Laminated safety glass interlayers
/// Laminated safety glass interlayers| Mechanical material behavior of polymeric interlayers Miriam Schuster, M.Sc. Teschnische Universität Darmstadt Institute of Structural Mechanics and Design
BE-AM
/// BE-AM BE-AM is an annual symposium on the theme of Additive Manufacturing in the Built Environment, organized by the two research unites Digital Design Unite / Faculty of Architecture and Institute of Structural Mechanics and Design / Faculty Civil
SPONG3D: Developing an integrated 3D-printed façade with complex geometries for active temperature control
///SPONG3D: Developing an integrated 3D-printed façade with complex geometries for active temperature control Spong3d is an adaptive 3d printed facade system that integrates multiple functions to optimize thermal performances according to the different environmental conditions throughout the year. The proposed
SPONG3D: Developing an integrated 3D-printed façade with complex geometries for active temperature control
///SPONG3D: Developing an integrated 3D-printed façade with complex geometries for active temperature control Spong3d is an adaptive 3d printed facade system that integrates multiple functions to optimize thermal performances according to the different environmental conditions throughout the year. The proposed
Future Envelope – Next Business
///Future Envelope – Next Business As part of our conference series the 2017 edition of the future envelope, held in June 2017 in Delft, was focusing on the potentials of new developments in technology, business, and the interaction. And as
Future Envelope – Next Business
///Future Envelope – Next Business As part of our conference series the 2017 edition of the future envelope, held in June 2017 in Delft, was focusing on the potentials of new developments in technology, business, and the interaction. And as
efnMOBILE workshop Delft 2017 – INTERACTING WITH THE FACADE: Lessons from everyday life in office buildings
///efnMOBIL workshop Delft 2017 – INTERACTING WITH THE FACADE: Lessons from everyday life in office buildings Students from the University of Applied Sciences Ostwestfalen-Lippe and Delft University of Technology participated in the workshop which was held at TU Delft from
efnMOBILE workshop Delft 2017 – INTERACTING WITH THE FACADE: Lessons from everyday life in office buildings
///efnMOBIL workshop Delft 2017 – INTERACTING WITH THE FACADE: Lessons from everyday life in office buildings Students from the University of Applied Sciences Ostwestfalen-Lippe and Delft University of Technology participated in the workshop which was held at TU Delft from
The Table 02
/// The Table 02 The concurrence of a video contest, and the assignment to design an innovative solution; the students and alamir worked on documenting the process as a summary of a researcher’s day at Technical University Darmstadt. The video
The Table 02
/// The Table 02 The concurrence of a video contest, and the assignment to design an innovative solution; the students and alamir worked on documenting the process as a summary of a researcher’s day at Technical University Darmstadt. The video
The Table 01
/// The Table 01 An idea to work on an innovative, simple solution to support table plate. Alamir Mohsen with a group of students worked on a parametric solution that considered the load conditions that will be subjected to the table. Then
The Table 01
/// The Table 01 An idea to work on an innovative, simple solution to support table plate. Alamir Mohsen with a group of students worked on a parametric solution that considered the load conditions that will be subjected to the table. Then
Advancing the manufacture of complex GFRC for today’s building envelopes
///Advancing the manufacture of complex GFRC for today’s building envelopes Thin-walled glass fiber reinforced concrete (GFRC) panels are being used as the primary cladding material on many landmark buildings, especially in the last decade. GFRC is an ideal material for
Advancing the manufacture of complex GFRC for today’s building envelopes
///Advancing the manufacture of complex GFRC for today’s building envelopes Thin-walled glass fiber reinforced concrete (GFRC) panels are being used as the primary cladding material on many landmark buildings, especially in the last decade. GFRC is an ideal material for
Facade Research Group Meeting 6/2017 in Delft
///Facade Research Group Meeting 6/2017 in Delft Being quite international and not entirely located in Delft, the members of the Façade Research Group of the TU Delft do meet twice per year – to discuss the content and status of
Facade Research Group Meeting 6/2017 in Delft
///Facade Research Group Meeting 6/2017 in Delft Being quite international and not entirely located in Delft, the members of the Façade Research Group of the TU Delft do meet twice per year – to discuss the content and status of
AM4AE
///AM4AE The role of additive manufacturing is becoming more relevant in the context of the construction industry. With projects ranging from fully-printed concrete houses to topology-optimized steel nodes, there is no doubt that additive manufacturing is making an impact. With
efnMOBILE Workshop 2017 – Delft | “INTERACTING WITH THE FACADE: Lessons from everyday life in office buildings”
///efnMOBILE Workshop 2017 – Delft| “INTERACTING WITH THE FACADE: Lessons from everyday life in office buildings.” The main goal of the workshop was to motivate a critical discussion about the role of façades during the operation phase of buildings, and
efnMOBILE Workshop 2017 – Delft | “INTERACTING WITH THE FACADE: Lessons from everyday life in office buildings”
///efnMOBILE Workshop 2017 – Delft| “INTERACTING WITH THE FACADE: Lessons from everyday life in office buildings.” The main goal of the workshop was to motivate a critical discussion about the role of façades during the operation phase of buildings, and
10 Facades for the Future; Concretise your Utopia | Student Design Competition
///10 Facades for the Future; Concretise your Utopia | Student Design Competition ’Ten Facades for the Future – Concretise your Utopia’ was a design competition for the facade system of the future in the pursuit of new and creative ideas,
10 Facades for the Future; Concretise your Utopia | Student Design Competition
///10 Facades for the Future; Concretise your Utopia | Student Design Competition ’Ten Facades for the Future – Concretise your Utopia’ was a design competition for the facade system of the future in the pursuit of new and creative ideas,
Geveltypologie
///Geveltypologie The first video of a series about façade types, this clip by Maarten Meijs is focusing on multi-layered facades.
Geveltypologie
///Geveltypologie The first video of a series about façade types, this clip by Maarten Meijs is focusing on multi-layered facades.
BAMP – house 1
///BAMP – house 1 The BAMP team is developing housing types out of paper in various construction systematics. The first solution is a paper tube skeleton structure: The cylindrical cardboard tube is the strongest element made from laminated paper that
BAMP – house 1
///BAMP – house 1 The BAMP team is developing housing types out of paper in various construction systematics. The first solution is a paper tube skeleton structure: The cylindrical cardboard tube is the strongest element made from laminated paper that
Braced and Rigid frame
/// Braced and Rigid frame Maarten Meijs is discussing the bracing of structures with cables or frame structures
Braced and Rigid frame
/// Braced and Rigid frame Maarten Meijs is discussing the bracing of structures with cables or frame structures
BAMP – Building with Paper
///BAMP – Building with Paper The central scientific objective of LOEWE focus BAMP is to systematically develop the advantages of paper materials and their application in the field of construction and architecture, creating the essential scientific foundations. Paper as a
BAMP – Building with Paper
///BAMP – Building with Paper The central scientific objective of LOEWE focus BAMP is to systematically develop the advantages of paper materials and their application in the field of construction and architecture, creating the essential scientific foundations. Paper as a
Advanced Ceramics R&D Lab
///Advanced Ceramics R&D Lab The Advanced Ceramics R&D Lab is an emerging laboratory, based in the Design Institute of Guimarães, which aims to explore the integration of digital additive manufacturing techniques in the architectural design and production processes of ceramic elements for
Advanced Ceramics R&D Lab
///Advanced Ceramics R&D Lab The Advanced Ceramics R&D Lab is an emerging laboratory, based in the Design Institute of Guimarães, which aims to explore the integration of digital additive manufacturing techniques in the architectural design and production processes of ceramic elements for
Facade Anchoring
/// Facade Anchoring Clip about facade anchoring by Maarten Meijs, Technical University Delft
Facade Anchoring
/// Facade Anchoring Clip about facade anchoring by Maarten Meijs, Technical University Delft
PO Lab/ TU Delft
/// PO Lab / TU Delft The Delft Product Development (PD) Test Lab was recently constructed in the courtyard of the Faculty of Architecture and the Built Environment. This example of innovative modular timber construction with a prefab aluminum cladding
PO Lab/ TU Delft
/// PO Lab / TU Delft The Delft Product Development (PD) Test Lab was recently constructed in the courtyard of the Faculty of Architecture and the Built Environment. This example of innovative modular timber construction with a prefab aluminum cladding
/// Future Engineering Talks | FET @ TU Darmstadt – SoSe 2017
/// Future Engineering Talks | FET @ TU Darmstadt – SoSe 2017 As well this semester Future Engineering Talks are taking place, Future Engineering Talks intend to fill the gab between academic studies and practice world. They give an overview
/// Future Engineering Talks | FET @ TU Darmstadt – SoSe 2017
/// Future Engineering Talks | FET @ TU Darmstadt – SoSe 2017 As well this semester Future Engineering Talks are taking place, Future Engineering Talks intend to fill the gab between academic studies and practice world. They give an overview
facadeworld 