Posts Tagged: additive

Architectural Façade + Product research group @ Royal Art in Copenhagen

///Architectural Façade + Product research group @ Royal Art in Copenhagen Twice a year the Architectural Façade + Product research group meets abroad to discuss and develop the research topics and Ph.D. projects of the members. On invitation of Professor

Architectural Façade + Product research group @ Royal Art in Copenhagen

///Architectural Façade + Product research group @ Royal Art in Copenhagen Twice a year the Architectural Façade + Product research group meets abroad to discuss and develop the research topics and Ph.D. projects of the members. On invitation of Professor

Glass Technology Live @ GlassTec 2018

///Glass Technology Live @ GlassTec 2018 Powered by the network of the 4 technical universities of Darmstadt, Delft Dresden and Dortmund this event was showing a condensed snapshot of the current technical development and the future opportunities to us the

Glass Technology Live @ GlassTec 2018

///Glass Technology Live @ GlassTec 2018 Powered by the network of the 4 technical universities of Darmstadt, Delft Dresden and Dortmund this event was showing a condensed snapshot of the current technical development and the future opportunities to us the

ISM+D @ TU Delft

///ISM+D @ TU Delft The Institute for Structural Mechanics + design visited for the annual Ph.D. seminar this year the TU Delft / Faculty of Architecture and the Built Environment. The teams form the 3 professors Jens Schneider, Stefan Kolling,

ISM+D @ TU Delft

///ISM+D @ TU Delft The Institute for Structural Mechanics + design visited for the annual Ph.D. seminar this year the TU Delft / Faculty of Architecture and the Built Environment. The teams form the 3 professors Jens Schneider, Stefan Kolling,

BE-AM Symposium Additive Manufacturing

///BE-AM Symposium Additive Manufacturing  Registration for BE-AM Symposium Additive Manufacturing in Building Environment is now open. Speakers as Alban Mallet / XTREEE (FR), Wessel van Beeredonk / Studio Rap (NL), Foteini Setaki / The New Raw (FR), Kare Stokholm Poulsgaard

BE-AM Symposium Additive Manufacturing

///BE-AM Symposium Additive Manufacturing  Registration for BE-AM Symposium Additive Manufacturing in Building Environment is now open. Speakers as Alban Mallet / XTREEE (FR), Wessel van Beeredonk / Studio Rap (NL), Foteini Setaki / The New Raw (FR), Kare Stokholm Poulsgaard

New established subprogram “Structural Glass and Facade Constructions” at TU Darmstadt

///New established subprogram “Structural Glass and Facade Constructions” at TU Darmstadt As part of the civil engineering MSc program, the Institute for Structural Mechanics and Design (ISM+D) at TU Darmstadt launched a sub-track “Structural Glass and Facade Constructions”. Being linked

New established subprogram “Structural Glass and Facade Constructions” at TU Darmstadt

///New established subprogram “Structural Glass and Facade Constructions” at TU Darmstadt As part of the civil engineering MSc program, the Institute for Structural Mechanics and Design (ISM+D) at TU Darmstadt launched a sub-track “Structural Glass and Facade Constructions”. Being linked

3-D Clay printing

///3-D Clay printing Dennis de Witte, M.Sc. Technical University Darmstadt Institute of Structural Mechanics and Design  

3-D Clay printing

///3-D Clay printing Dennis de Witte, M.Sc. Technical University Darmstadt Institute of Structural Mechanics and Design  

Material Xperience Exhibition | 13-15. March in Rotterdam

///  Material Xperience Exhibition | 13-15. March in Rotterdam Curated exhibition and lectures: Discover at Material Xperience innovative and inspiring materials from the independent Materia collection, innovations from selected partners, new and technologies and applications. Next to themes around interior,

Material Xperience Exhibition | 13-15. March in Rotterdam

///  Material Xperience Exhibition | 13-15. March in Rotterdam Curated exhibition and lectures: Discover at Material Xperience innovative and inspiring materials from the independent Materia collection, innovations from selected partners, new and technologies and applications. Next to themes around interior,

Additive Manufacturing with glass for applications in the built environment

///Additive Manufacturing with glass for applications in the built environment Robert Akerboom, MSc. Teschnische Universität Darmstadt Institute of Structural Mechanics and Design

Additive Manufacturing with glass for applications in the built environment

///Additive Manufacturing with glass for applications in the built environment Robert Akerboom, MSc. Teschnische Universität Darmstadt Institute of Structural Mechanics and Design

Robotic Wire-Arc Additive Manufacturing (W.A.A.M) in Construction

///Robotic Wire-Arc Additive Manufacturing (W.A.A.M) in Construction Ir. Chris Borg Costanzi.Msc Teschnische Universität Darmstadt Institute of Structural Mechanics and Design

Robotic Wire-Arc Additive Manufacturing (W.A.A.M) in Construction

///Robotic Wire-Arc Additive Manufacturing (W.A.A.M) in Construction Ir. Chris Borg Costanzi.Msc Teschnische Universität Darmstadt Institute of Structural Mechanics and Design

Imagine Books now open access available!

/// Imagine Books now open access available! The full Imagine series is now available as open access download from BK BOOKS. Imagine is a series of publications that investigates technology and material development to provide architects and designers with ideas for

Imagine Books now open access available!

/// Imagine Books now open access available! The full Imagine series is now available as open access download from BK BOOKS. Imagine is a series of publications that investigates technology and material development to provide architects and designers with ideas for

AM4AE : Documenting Additive Manufacturing in Construction

///AM4AE : Documenting Additive Manufacturing in Construction Ir. Chris Borg Costanzi.Msc Technische Universität Darmstadt Institute of Structural Mechanics and Design

AM4AE : Documenting Additive Manufacturing in Construction

///AM4AE : Documenting Additive Manufacturing in Construction Ir. Chris Borg Costanzi.Msc Technische Universität Darmstadt Institute of Structural Mechanics and Design

University Network for Glass Technology Live 2018

///University Network for Glass Technology Live 2018 Robert Akerboom, MSc. Teschnische Universität Darmstadt Institute of Structural Mechanics and Design

University Network for Glass Technology Live 2018

///University Network for Glass Technology Live 2018 Robert Akerboom, MSc. Teschnische Universität Darmstadt Institute of Structural Mechanics and Design

Facade Tectonics

/// Facade Tectonics Façade Tectonics started as a series of invited roundtable discussions at the University of Southern California School of Architecture in 2007; a strategic response to the escalating importance and complexity of building facade technology. The roundtables grew

Facade Tectonics

/// Facade Tectonics Façade Tectonics started as a series of invited roundtable discussions at the University of Southern California School of Architecture in 2007; a strategic response to the escalating importance and complexity of building facade technology. The roundtables grew

efnMOBIL 2.0 book

///efnMOBIL 2.0 book  Based on the experiences of efnMOBILE 1.0 the hands-on student workshop activities and exhibitions took place in different environments and locations encouraging new technologies and methodologies. Like efnMOBILE 1.0 the new workshop series efnMOBILE 2.0 provides the

efnMOBIL 2.0 book

///efnMOBIL 2.0 book  Based on the experiences of efnMOBILE 1.0 the hands-on student workshop activities and exhibitions took place in different environments and locations encouraging new technologies and methodologies. Like efnMOBILE 1.0 the new workshop series efnMOBILE 2.0 provides the

RILEM

///RILEM It is an honor to announce this Rilem technical committee DFC supported a workshop on 3D Manufacturing Technologies in Constructions at 21.11.2017 in Delft, focusing on the rapidly developing technologies in the built environment. Due to the limited space,

RILEM

///RILEM It is an honor to announce this Rilem technical committee DFC supported a workshop on 3D Manufacturing Technologies in Constructions at 21.11.2017 in Delft, focusing on the rapidly developing technologies in the built environment. Due to the limited space,

The Table 02

/// The Table 02 The concurrence of a video contest, and the assignment to design an innovative solution; the students and alamir worked on documenting the process as a summary of a researcher’s day at Technical University Darmstadt. The video

The Table 02

/// The Table 02 The concurrence of a video contest, and the assignment to design an innovative solution; the students and alamir worked on documenting the process as a summary of a researcher’s day at Technical University Darmstadt. The video

The Table 01

/// The Table 01 An idea to work on an innovative, simple solution to support table plate. Alamir Mohsen with a group of students worked on a parametric solution that considered the load conditions that will be subjected to the table. Then

The Table 01

/// The Table 01 An idea to work on an innovative, simple solution to support table plate. Alamir Mohsen with a group of students worked on a parametric solution that considered the load conditions that will be subjected to the table. Then

AM4AE

///AM4AE The role of additive manufacturing is becoming more relevant in the context of the construction industry. With projects ranging from fully-printed concrete houses to topology-optimized steel nodes, there is no doubt that additive manufacturing is making an impact. With

AM4AE

///AM4AE The role of additive manufacturing is becoming more relevant in the context of the construction industry. With projects ranging from fully-printed concrete houses to topology-optimized steel nodes, there is no doubt that additive manufacturing is making an impact. With

Powerskin Conference 2017 Summary

/// Powerskin Conference 2017 Summary Powerskin Conference 2017 was empowering, motivating and full of revelations. Over 200 participant were present to enjoy this spectacular event. For more information check here.

Powerskin Conference 2017 Summary

/// Powerskin Conference 2017 Summary Powerskin Conference 2017 was empowering, motivating and full of revelations. Over 200 participant were present to enjoy this spectacular event. For more information check here.

Journal of Façade Design & Engineering | Volume 5 / No1 / 2017

/// Journal of Façade Design & Engineering | Volume 5 / No1 / 2017 New Journal is out: This issue is the result of the facade conference Powerskin, held on 19 January 2016 at the building trade-fair ‘Bau’ in Munich. The conference

Journal of Façade Design & Engineering | Volume 5 / No1 / 2017

/// Journal of Façade Design & Engineering | Volume 5 / No1 / 2017 New Journal is out: This issue is the result of the facade conference Powerskin, held on 19 January 2016 at the building trade-fair ‘Bau’ in Munich. The conference

FRG @ gFT / Cambridge

///FRG @ gFT / Cambridge The TU Delft Facade Research Group is meeting twice per year – to talk, develop and evaluate the ongoing research. This time the group was invited to meet the Glass and Façade Technology research group

FRG @ gFT / Cambridge

///FRG @ gFT / Cambridge The TU Delft Facade Research Group is meeting twice per year – to talk, develop and evaluate the ongoing research. This time the group was invited to meet the Glass and Façade Technology research group

Ceramics in an AM process | Performance

///Ceramics in an AM process | Performance How 3D printed materials perform if they are compared to traditional produced products is an interesting research. To get a general understanding of material behaviour we started printing standardised stones with a ceramic

Ceramics in an AM process | Performance

///Ceramics in an AM process | Performance How 3D printed materials perform if they are compared to traditional produced products is an interesting research. To get a general understanding of material behaviour we started printing standardised stones with a ceramic

Additive Manufactring Triple Sessions | Darmstadt, Eindhoven and Delft

/// Additive Manufactring Triple Sessions | Darmstadt, Eindhoven and Delft  There were these sessions about additive manufacturing in the built environment – or let’s call it 3D Printing for buildings. Interesting triple in Darmstadt, Eindhoven and Delft with lots of lectures

Additive Manufactring Triple Sessions | Darmstadt, Eindhoven and Delft

/// Additive Manufactring Triple Sessions | Darmstadt, Eindhoven and Delft  There were these sessions about additive manufacturing in the built environment – or let’s call it 3D Printing for buildings. Interesting triple in Darmstadt, Eindhoven and Delft with lots of lectures

JFDE 3/2015

///JFDE 3/2015 The papers in this issue of JFDE discuss the potential of adaptive building envelopes, component development as well as implementation strategies. The applied practice paper demonstrates decision strategies behind the adaptive sun shading system of the Al-Bahr Towers.

JFDE 3/2015

///JFDE 3/2015 The papers in this issue of JFDE discuss the potential of adaptive building envelopes, component development as well as implementation strategies. The applied practice paper demonstrates decision strategies behind the adaptive sun shading system of the Al-Bahr Towers.

Ceramics in an AM process | Freeform surface

///Ceramics in an AM process | Freeform surface This free form brick was printed using a continuous flow. The advantage of a continuous extrusion path, controlled by g-code, is that the filament is not interrupted, which allows a faster print

Ceramics in an AM process | Freeform surface

///Ceramics in an AM process | Freeform surface This free form brick was printed using a continuous flow. The advantage of a continuous extrusion path, controlled by g-code, is that the filament is not interrupted, which allows a faster print