Posts Tagged: additive

The Table 01

/// The Table 01 An idea to work on an innovative, simple solution to support table plate. Alamir Mohsen with a group of students worked on a parametric solution that considered the load conditions that will be subjected to the table. Then

The Table 01

/// The Table 01 An idea to work on an innovative, simple solution to support table plate. Alamir Mohsen with a group of students worked on a parametric solution that considered the load conditions that will be subjected to the table. Then

AM4AE

///AM4AE The role of additive manufacturing is becoming more relevant in the context of the construction industry. With projects ranging from fully-printed concrete houses to topology-optimized steel nodes, there is no doubt that additive manufacturing is making an impact. With

AM4AE

///AM4AE The role of additive manufacturing is becoming more relevant in the context of the construction industry. With projects ranging from fully-printed concrete houses to topology-optimized steel nodes, there is no doubt that additive manufacturing is making an impact. With

Powerskin Conference 2017 Summary

/// Powerskin Conference 2017 Summary Powerskin Conference 2017 was empowering, motivating and full of revelations. Over 200 participant were present to enjoy this spectacular event. For more information check here.

Powerskin Conference 2017 Summary

/// Powerskin Conference 2017 Summary Powerskin Conference 2017 was empowering, motivating and full of revelations. Over 200 participant were present to enjoy this spectacular event. For more information check here.

Journal of Façade Design & Engineering | Volume 5 / No1 / 2017

/// Journal of Façade Design & Engineering | Volume 5 / No1 / 2017 New Journal is out: This issue is the result of the facade conference Powerskin, held on 19 January 2016 at the building trade-fair ‘Bau’ in Munich. The conference

Journal of Façade Design & Engineering | Volume 5 / No1 / 2017

/// Journal of Façade Design & Engineering | Volume 5 / No1 / 2017 New Journal is out: This issue is the result of the facade conference Powerskin, held on 19 January 2016 at the building trade-fair ‘Bau’ in Munich. The conference

FRG @ gFT / Cambridge

///FRG @ gFT / Cambridge The TU Delft Facade Research Group is meeting twice per year – to talk, develop and evaluate the ongoing research. This time the group was invited to meet the Glass and Façade Technology research group

FRG @ gFT / Cambridge

///FRG @ gFT / Cambridge The TU Delft Facade Research Group is meeting twice per year – to talk, develop and evaluate the ongoing research. This time the group was invited to meet the Glass and Façade Technology research group

Ceramics in an AM process | Performance

///Ceramics in an AM process | Performance How 3D printed materials perform if they are compared to traditional produced products is an interesting research. To get a general understanding of material behaviour we started printing standardised stones with a ceramic

Ceramics in an AM process | Performance

///Ceramics in an AM process | Performance How 3D printed materials perform if they are compared to traditional produced products is an interesting research. To get a general understanding of material behaviour we started printing standardised stones with a ceramic

Additive Manufactring Triple Sessions | Darmstadt, Eindhoven and Delft

/// Additive Manufactring Triple Sessions | Darmstadt, Eindhoven and Delft  There were these sessions about additive manufacturing in the built environment – or let’s call it 3D Printing for buildings. Interesting triple in Darmstadt, Eindhoven and Delft with lots of lectures

Additive Manufactring Triple Sessions | Darmstadt, Eindhoven and Delft

/// Additive Manufactring Triple Sessions | Darmstadt, Eindhoven and Delft  There were these sessions about additive manufacturing in the built environment – or let’s call it 3D Printing for buildings. Interesting triple in Darmstadt, Eindhoven and Delft with lots of lectures

JFDE 3/2015

///JFDE 3/2015 The papers in this issue of JFDE discuss the potential of adaptive building envelopes, component development as well as implementation strategies. The applied practice paper demonstrates decision strategies behind the adaptive sun shading system of the Al-Bahr Towers.

JFDE 3/2015

///JFDE 3/2015 The papers in this issue of JFDE discuss the potential of adaptive building envelopes, component development as well as implementation strategies. The applied practice paper demonstrates decision strategies behind the adaptive sun shading system of the Al-Bahr Towers.

Ceramics in an AM process | Freeform surface

///Ceramics in an AM process | Freeform surface This free form brick was printed using a continuous flow. The advantage of a continuous extrusion path, controlled by g-code, is that the filament is not interrupted, which allows a faster print

Ceramics in an AM process | Freeform surface

///Ceramics in an AM process | Freeform surface This free form brick was printed using a continuous flow. The advantage of a continuous extrusion path, controlled by g-code, is that the filament is not interrupted, which allows a faster print

Ceramics in an AM process | One material solution

///Ceramics in an AM process | One material solution The ability to produce so called one-material-wall systems is promising: there is an increasing demand for the raw materials to be recycled, but recycling components made out of different materials is hard. By

Ceramics in an AM process | One material solution

///Ceramics in an AM process | One material solution The ability to produce so called one-material-wall systems is promising: there is an increasing demand for the raw materials to be recycled, but recycling components made out of different materials is hard. By

Think Tank @ TU Darmstadt| Think Tank on Additive Manufacturing

///Think Tank @ TU Darmstadt |Think Tank on Additive Manufacturing Additive Manufacturing (AM), a production technique that can build freeform geometry by adding layers of material on top of each other. Experimenting with AM, what will it bring for the building industry? This Think Tank focus

Think Tank @ TU Darmstadt| Think Tank on Additive Manufacturing

///Think Tank @ TU Darmstadt |Think Tank on Additive Manufacturing Additive Manufacturing (AM), a production technique that can build freeform geometry by adding layers of material on top of each other. Experimenting with AM, what will it bring for the building industry? This Think Tank focus

Additive Glass Manufacturing

/// Additive Glass Manufacturing. The potential of additively fabricated glass connections for facade applications. PhD Researcher: Lisa Rammig First Mentor: Prof. Dr. Ing. Ulrich Knaack

Additive Glass Manufacturing

/// Additive Glass Manufacturing. The potential of additively fabricated glass connections for facade applications. PhD Researcher: Lisa Rammig First Mentor: Prof. Dr. Ing. Ulrich Knaack