Author Archives: alamir mohsen
PhD defense Michi Drass: “Constitutive modeling and failure prediction of silicon adhesives and facade design”
/// PhD defense Michi Drass: “Constitutive modeling and failure prediction of silicon adhesives and facade design” The objective of the dissertation by Dr. Michael Drass aims to improve the understanding of the elementary material behavior of flat-bonded structural silicone adhesives
PhD defense Michi Drass: “Constitutive modeling and failure prediction of silicon adhesives and facade design”
/// PhD defense Michi Drass: “Constitutive modeling and failure prediction of silicon adhesives and facade design” The objective of the dissertation by Dr. Michael Drass aims to improve the understanding of the elementary material behavior of flat-bonded structural silicone adhesives
Water conservation cladding made form a stone sludge composite
///Water conservation cladding made form a stone sludge composite Ainsley Vella, B.A hons Product Design, MCAST, Malta. The cladding was designed to utilize stone sludge waste, which is generated in marble factories and discarded in landfills with no further use.
Water conservation cladding made form a stone sludge composite
///Water conservation cladding made form a stone sludge composite Ainsley Vella, B.A hons Product Design, MCAST, Malta. The cladding was designed to utilize stone sludge waste, which is generated in marble factories and discarded in landfills with no further use.
Ph.D. Seminar ISM+D 2019
/// Ph.D. Seminar ISM+D 2019 The 2019 version of our Ph.D. Seminar took place at Burg Stauffenberg. As usual, we had intensive 4 days with presentations and discussions of the status of the Ph.D. projects, being active at the Institute of
Ph.D. Seminar ISM+D 2019
/// Ph.D. Seminar ISM+D 2019 The 2019 version of our Ph.D. Seminar took place at Burg Stauffenberg. As usual, we had intensive 4 days with presentations and discussions of the status of the Ph.D. projects, being active at the Institute of
MOOC – Circular Economy for a Sustainable Built Environment
///MOOC – Circular Economy for a Sustainable Built Environment Mooc´s – massive open online courses: are on lie courses, given for free. TU Delft is active in facilitating this and runs an intensive program. The MOOC – Circular Economy for
MOOC – Circular Economy for a Sustainable Built Environment
///MOOC – Circular Economy for a Sustainable Built Environment Mooc´s – massive open online courses: are on lie courses, given for free. TU Delft is active in facilitating this and runs an intensive program. The MOOC – Circular Economy for
BE-AM 2019 Symposium Registration
///BE-AM 2019 Symposium Registration BE-AM | Built Environment – Additive Manufacturing: 2019 symposium for additive manufacturing in the built environment! We are pleased to open the registration for the. For the first time, the symposium will take place this year
BE-AM 2019 Symposium Registration
///BE-AM 2019 Symposium Registration BE-AM | Built Environment – Additive Manufacturing: 2019 symposium for additive manufacturing in the built environment! We are pleased to open the registration for the. For the first time, the symposium will take place this year
International Facade + Glass Lab
/// International Facade + Glass Lab The International Façade + Glass Lab is a cooperation between the Tongji University / College of Civil Engineering, TU Darmstadt / Faculty of Civil Engineering and the TU Delft / Department of Architectural Engineering
International Facade + Glass Lab
/// International Facade + Glass Lab The International Façade + Glass Lab is a cooperation between the Tongji University / College of Civil Engineering, TU Darmstadt / Faculty of Civil Engineering and the TU Delft / Department of Architectural Engineering
Façade Design & Engineering – An emerging discipline
///Façade Design & Engineering – An emerging discipline Façades form the interface between the ever-changing outside conditions and the inside climate where we spend most of our time. Façade design & Engineering is a new field of expertise that deals
Façade Design & Engineering – An emerging discipline
///Façade Design & Engineering – An emerging discipline Façades form the interface between the ever-changing outside conditions and the inside climate where we spend most of our time. Façade design & Engineering is a new field of expertise that deals
Fachadas
///Fachadas Bill Marshall, one of the leading façade consultant in South America, opened this blog about facades, proposing projects, event, and technical information. Interesting to get this community linked as well! For more information see here.
AE+T Blog
///AE+T Blog AE+T – the Department Architectural Engineering and Technology at TU Delft, Faculty of Architecture and the Built Environment, now runs a blog – to announce activities, events, and results of the department and to create a community of
Dr.Bucky Lab in Polytechnika Wroclaw – architectural summer school 2019
///Dr.Bucky Lab in Polytechnika Wroclaw – architectural summer school 2019 During this year’s Architectural Summerschool organized by the Politechnika Wroclaw and the TU Delft, the experts Dr. Marcel Bilow aka Dr. Bucky Lab and Dr. Jurek Latka joined forces and
Dr.Bucky Lab in Polytechnika Wroclaw – architectural summer school 2019
///Dr.Bucky Lab in Polytechnika Wroclaw – architectural summer school 2019 During this year’s Architectural Summerschool organized by the Politechnika Wroclaw and the TU Delft, the experts Dr. Marcel Bilow aka Dr. Bucky Lab and Dr. Jurek Latka joined forces and
WORLDS FIRST 3-D-Printed Bridge MIDAIR Across FLOWING WATER
///WORLDS FIRST 3-D-Printed Bridge MIDAIR Across FLOWING WATER The institute for steel structures and the Institute for Structural Mechanic and Design at Technische Universität Darmstadt are in progress to do a first 3D printed steel bridge across flowing water, using
WORLDS FIRST 3-D-Printed Bridge MIDAIR Across FLOWING WATER
///WORLDS FIRST 3-D-Printed Bridge MIDAIR Across FLOWING WATER The institute for steel structures and the Institute for Structural Mechanic and Design at Technische Universität Darmstadt are in progress to do a first 3D printed steel bridge across flowing water, using
Building with Paper Conference 2019
///Building with Paper Conference 2019 Natural materials such as wood or paper have been used in the building industry and architecture for thousands of years and still play an important role in modern building and interior construction, today. The available
Building with Paper Conference 2019
///Building with Paper Conference 2019 Natural materials such as wood or paper have been used in the building industry and architecture for thousands of years and still play an important role in modern building and interior construction, today. The available
The Glass Competence Center (GCC) of the TU Darmstadt
///The Glass Competence Center (GCC) of the TU Darmstadt The Institute for Statics and Design (ISM+D) and the Material Testing Institute (MPA) of the TU Darmstadt both have strong competencies in the field of glass construction. A team of 15
The Glass Competence Center (GCC) of the TU Darmstadt
///The Glass Competence Center (GCC) of the TU Darmstadt The Institute for Statics and Design (ISM+D) and the Material Testing Institute (MPA) of the TU Darmstadt both have strong competencies in the field of glass construction. A team of 15
Structural Monitoring and Load Identification by means of Vibration Measurements
///Structural Monitoring and Load Identification by means of Vibration Measurements Steven Lorenzen Technical University Darmstadt Institute of Structural Mechanics and Design
Structural Monitoring and Load Identification by means of Vibration Measurements
///Structural Monitoring and Load Identification by means of Vibration Measurements Steven Lorenzen Technical University Darmstadt Institute of Structural Mechanics and Design
Architect Facade + Product Research Group in Delft
///Architect Facade + Product Research Group in Delft Twice a year, the Architectural Facades + Product Research Group meets to discuss the current status of ongoing research and Ph.D. projects. This summer term meeting was held in Delft – participants
Architect Facade + Product Research Group in Delft
///Architect Facade + Product Research Group in Delft Twice a year, the Architectural Facades + Product Research Group meets to discuss the current status of ongoing research and Ph.D. projects. This summer term meeting was held in Delft – participants
Glass strength at high temperatures up to the transformation range
///Glass strength at high temperatures up to the transformation range Gregor Schwind Technical University Darmstadt Institute of Structural Mechanics and Design
Glass strength at high temperatures up to the transformation range
///Glass strength at high temperatures up to the transformation range Gregor Schwind Technical University Darmstadt Institute of Structural Mechanics and Design
Additive Manufacturing Technologies for the Build Environment
///Additive Manufacturing Technologies for the Build Environment Dunia Abdulla Agha Technical University Darmstadt Institute of Structural Mechanics and Design
Additive Manufacturing Technologies for the Build Environment
///Additive Manufacturing Technologies for the Build Environment Dunia Abdulla Agha Technical University Darmstadt Institute of Structural Mechanics and Design
Characterization Of Construction and Acting Load
///Characterization Of Construction and Acting Load Hagen Berthold, M.Sc. Technical University Darmstadt Institute of Structural Mechanics and Design
Characterization Of Construction and Acting Load
///Characterization Of Construction and Acting Load Hagen Berthold, M.Sc. Technical University Darmstadt Institute of Structural Mechanics and Design
BE-AM 2019
/// BE-AM 2019 On November 20, 2019, the symposium BE-AM | Built Environment – Additive Manufacturing will take place at the FormNext, the largest trade far for additive manufacturing in Frankfurt. For the fifth time, Prof. Dr.-Ing. Ulrich Knaack (Institute
BE-AM 2019
/// BE-AM 2019 On November 20, 2019, the symposium BE-AM | Built Environment – Additive Manufacturing will take place at the FormNext, the largest trade far for additive manufacturing in Frankfurt. For the fifth time, Prof. Dr.-Ing. Ulrich Knaack (Institute
Optical Anisotropy effects in thermally tempered glass
///Optical Anisotropy effects in thermally tempered glass Kerstin Thiele, M.Eng. Technical University Darmstadt Institute of Structural Mechanics and Design
Optical Anisotropy effects in thermally tempered glass
///Optical Anisotropy effects in thermally tempered glass Kerstin Thiele, M.Eng. Technical University Darmstadt Institute of Structural Mechanics and Design
Lithium Architects GmbH
/// Lithium Architects GmbH Lithium Architects GmbH was founded in September 2018 as an Architectural and Façade consultant. Lithium Architects GmbH is a group of Architects, Engineers, and Researchers, who are dedicated to develop construction solutions for classic and complex
Lithium Architects GmbH
/// Lithium Architects GmbH Lithium Architects GmbH was founded in September 2018 as an Architectural and Façade consultant. Lithium Architects GmbH is a group of Architects, Engineers, and Researchers, who are dedicated to develop construction solutions for classic and complex
Cold-bent thin glass for architectural applications
///Cold-bent thin glass for architectural applications Timon Peters M.Sc. Technical University Darmstadt Institute of Structural Mechanics and Design
Cold-bent thin glass for architectural applications
///Cold-bent thin glass for architectural applications Timon Peters M.Sc. Technical University Darmstadt Institute of Structural Mechanics and Design
Ph.D. Defense Mira Conci
/// Ph.D. Defense Mira Conci Mira Conci successfully discussed her dissertation with the title “E3 – A parametric model to evaluate trade-offs between the Energetic, Economic, and Environmental lifecycle performance of building projects”. Her work focuses on evaluating the decarbonization
Ph.D. Defense Mira Conci
/// Ph.D. Defense Mira Conci Mira Conci successfully discussed her dissertation with the title “E3 – A parametric model to evaluate trade-offs between the Energetic, Economic, and Environmental lifecycle performance of building projects”. Her work focuses on evaluating the decarbonization
Journal of Façade Design and Engineering – call for paper!
///Journal of Façade Design and Engineering – call for paper! The Journal of Facade Design and Engineering (JFDE) is currently accepting entries for a new issue: issue 7 no. 2 is on its way! Scope The Journal of Facade Design
Journal of Façade Design and Engineering – call for paper!
///Journal of Façade Design and Engineering – call for paper! The Journal of Facade Design and Engineering (JFDE) is currently accepting entries for a new issue: issue 7 no. 2 is on its way! Scope The Journal of Facade Design
NEXT Facade Session
/// NEXT Facade Session The facade manages the relationship between the interior and exterior space. This defines the requirements of the technical building infrastructure and at the same time the appearance of the building. The actual question is: what do
NEXT Facade Session
/// NEXT Facade Session The facade manages the relationship between the interior and exterior space. This defines the requirements of the technical building infrastructure and at the same time the appearance of the building. The actual question is: what do
facadeworld 