Posts Tagged: design
Facade Research Group @ Kunsthochschule Berlin and FacadLab
/// Facade Research Group @ Kunsthochschule Berlin and FacadLab This winter meeting of the Façade research group was in Berlin! The first day we were hosted at the Weissensee Kunsthochschule Berlin at Prof Christiane Sauer chair, which is investigating textile envelopes.
Facade Research Group @ Kunsthochschule Berlin and FacadLab
/// Facade Research Group @ Kunsthochschule Berlin and FacadLab This winter meeting of the Façade research group was in Berlin! The first day we were hosted at the Weissensee Kunsthochschule Berlin at Prof Christiane Sauer chair, which is investigating textile envelopes.
Additive Manufacturing with glass for applications in the built environment
///Additive Manufacturing with glass for applications in the built environment Robert Akerboom, MSc. Teschnische Universität Darmstadt Institute of Structural Mechanics and Design
Additive Manufacturing with glass for applications in the built environment
///Additive Manufacturing with glass for applications in the built environment Robert Akerboom, MSc. Teschnische Universität Darmstadt Institute of Structural Mechanics and Design
SeRaMCo: Secondary Raw Materials for Concrete Precast Products
/// SeRaMCo: Secondary Raw Materials for Concrete Precast Products SeRaMCo – Secondary Raw Materials for Concrete Precast Products is an EU funded research cooperation between industry and academia with the task to investigate the potentials and applications of recycled concrete. To
SeRaMCo: Secondary Raw Materials for Concrete Precast Products
/// SeRaMCo: Secondary Raw Materials for Concrete Precast Products SeRaMCo – Secondary Raw Materials for Concrete Precast Products is an EU funded research cooperation between industry and academia with the task to investigate the potentials and applications of recycled concrete. To
Robotic Wire-Arc Additive Manufacturing (W.A.A.M) in Construction
///Robotic Wire-Arc Additive Manufacturing (W.A.A.M) in Construction Ir. Chris Borg Costanzi.Msc Teschnische Universität Darmstadt Institute of Structural Mechanics and Design
Robotic Wire-Arc Additive Manufacturing (W.A.A.M) in Construction
///Robotic Wire-Arc Additive Manufacturing (W.A.A.M) in Construction Ir. Chris Borg Costanzi.Msc Teschnische Universität Darmstadt Institute of Structural Mechanics and Design
Imagine Books now open access available!
/// Imagine Books now open access available! The full Imagine series is now available as open access download from BK BOOKS.Imagine is a series of publications that investigates technology and material development to provide architects and designers with ideas for their
Imagine Books now open access available!
/// Imagine Books now open access available! The full Imagine series is now available as open access download from BK BOOKS.Imagine is a series of publications that investigates technology and material development to provide architects and designers with ideas for their
AM4AE : Documenting Additive Manufacturing in Construction
///AM4AE : Documenting Additive Manufacturing in Construction Ir. Chris Borg Costanzi.Msc Technische Universität Darmstadt Institute of Structural Mechanics and Design
AM4AE : Documenting Additive Manufacturing in Construction
///AM4AE : Documenting Additive Manufacturing in Construction Ir. Chris Borg Costanzi.Msc Technische Universität Darmstadt Institute of Structural Mechanics and Design
University Network for Glass Technology Live 2018
///University Network for Glass Technology Live 2018 Robert Akerboom, MSc. Teschnische Universität Darmstadt Institute of Structural Mechanics and Design
University Network for Glass Technology Live 2018
///University Network for Glass Technology Live 2018 Robert Akerboom, MSc. Teschnische Universität Darmstadt Institute of Structural Mechanics and Design
Interreg Nort-West Europe | SeraMco
///Interreg Nort-West Europe | SeraMco The construction sector is the most resource intensive industrial sector in the EU. It uses around 50% of the available primary raw materials, hence exhausting the natural resources, degrading the environment and generating high costs
Interreg Nort-West Europe | SeraMco
///Interreg Nort-West Europe | SeraMco The construction sector is the most resource intensive industrial sector in the EU. It uses around 50% of the available primary raw materials, hence exhausting the natural resources, degrading the environment and generating high costs
Glass Structures & Engineering | Volume 2, Issue 2, October 2017
///Glass Structures & Engineering | Volume 2, Issue 2, October 2017 This journal provides an international forum for presentation and discussion of developments in structural glass research and their practical applications, offering a holistic approach to research, construction and engineering.
Glass Structures & Engineering | Volume 2, Issue 2, October 2017
///Glass Structures & Engineering | Volume 2, Issue 2, October 2017 This journal provides an international forum for presentation and discussion of developments in structural glass research and their practical applications, offering a holistic approach to research, construction and engineering.
Facade Tectonics
/// Facade Tectonics Façade Tectonics started as a series of invited roundtable discussions at the University of Southern California School of Architecture in 2007; a strategic response to the escalating importance and complexity of building facade technology. The roundtables grew
Facade Tectonics
/// Facade Tectonics Façade Tectonics started as a series of invited roundtable discussions at the University of Southern California School of Architecture in 2007; a strategic response to the escalating importance and complexity of building facade technology. The roundtables grew
Journal of Facade Design & Engineering
/// Journal of Facade Design & Engineering Dear JFDE Readers and Authors, After four volumes of JFDE we can conclude that JFDE is still being seen as a ‘young’ journal just as the scientific area it is aiming to serve.
Journal of Facade Design & Engineering
/// Journal of Facade Design & Engineering Dear JFDE Readers and Authors, After four volumes of JFDE we can conclude that JFDE is still being seen as a ‘young’ journal just as the scientific area it is aiming to serve.
efnMOBIL 2.0 book
///efnMOBIL 2.0 book Based on the experiences of efnMOBILE 1.0 the hands-on student workshop activities and exhibitions took place in different environments and locations encouraging new technologies and methodologies. Like efnMOBILE 1.0 the new workshop series efnMOBILE 2.0 provides the
efnMOBIL 2.0 book
///efnMOBIL 2.0 book Based on the experiences of efnMOBILE 1.0 the hands-on student workshop activities and exhibitions took place in different environments and locations encouraging new technologies and methodologies. Like efnMOBILE 1.0 the new workshop series efnMOBILE 2.0 provides the
RILEM
///RILEM It is an honor to announce this Rilem technical committee DFC supported a workshop on 3D Manufacturing Technologies in Constructions at 21.11.2017 in Delft, focusing on the rapidly developing technologies in the built environment. Due to the limited space,
Ph.D. Thermal Comfort in Sun Spaces by Christian Wiegel
///Ph.D. Thermal Comfort in Sun Spaces by Christian Wiegel Preparation for fossil fuel substitution in the building sector persists as an essential subject in architectural engineering. Since the building sector still remains as one of the three major global end
Ph.D. Thermal Comfort in Sun Spaces by Christian Wiegel
///Ph.D. Thermal Comfort in Sun Spaces by Christian Wiegel Preparation for fossil fuel substitution in the building sector persists as an essential subject in architectural engineering. Since the building sector still remains as one of the three major global end
Ph.D. defense | Christian Wiegel
///Ph.D. defense | Christian Wiegel At 12. October Christian presented his Ph.D. theses “Thermal Comfort in Sun Spaces”, supported by Solarlux. The committee of the TU Rector representative Hans Beunderman, Ulrich Knaack, Tillmann Klein, Thomas Auer, Uta Pottgiesser, Mathias Rudolph,
Ph.D. defense | Christian Wiegel
///Ph.D. defense | Christian Wiegel At 12. October Christian presented his Ph.D. theses “Thermal Comfort in Sun Spaces”, supported by Solarlux. The committee of the TU Rector representative Hans Beunderman, Ulrich Knaack, Tillmann Klein, Thomas Auer, Uta Pottgiesser, Mathias Rudolph,
ISM+D annual PhD seminar
///ISM+D annual Ph.D. seminar Each year, the group of PhD´s of the Institute of structural Mechanic and Design ISM+D is meeting to exchange results and development of the individual Ph.D. This year we meet in Trifels – South-West Germany. The
ISM+D annual PhD seminar
///ISM+D annual Ph.D. seminar Each year, the group of PhD´s of the Institute of structural Mechanic and Design ISM+D is meeting to exchange results and development of the individual Ph.D. This year we meet in Trifels – South-West Germany. The
BE-AM
/// BE-AM BE-AM is an annual symposium on the theme of Additive Manufacturing in the Built Environment, organized by the two research unites Digital Design Unite / Faculty of Architecture and Institute of Structural Mechanics and Design / Faculty Civil
Load bearing competition | ISM+D
///Load bearing competition | ISM+D Each year in Technical University Darmstadt; a voluntary load bearing competition takes place for the students, which study module static 1. The students are getting divided into groups, and they compete against each other.
Load bearing competition | ISM+D
///Load bearing competition | ISM+D Each year in Technical University Darmstadt; a voluntary load bearing competition takes place for the students, which study module static 1. The students are getting divided into groups, and they compete against each other.
SPONG3D: Developing an integrated 3D-printed façade with complex geometries for active temperature control
///SPONG3D: Developing an integrated 3D-printed façade with complex geometries for active temperature control Spong3d is an adaptive 3d printed facade system that integrates multiple functions to optimize thermal performances according to the different environmental conditions throughout the year. The proposed
SPONG3D: Developing an integrated 3D-printed façade with complex geometries for active temperature control
///SPONG3D: Developing an integrated 3D-printed façade with complex geometries for active temperature control Spong3d is an adaptive 3d printed facade system that integrates multiple functions to optimize thermal performances according to the different environmental conditions throughout the year. The proposed
Future Envelope – Next Business
///Future Envelope – Next Business As part of our conference series the 2017 edition of the future envelope, held in June 2017 in Delft, was focusing on the potentials of new developments in technology, business, and the interaction. And as
Future Envelope – Next Business
///Future Envelope – Next Business As part of our conference series the 2017 edition of the future envelope, held in June 2017 in Delft, was focusing on the potentials of new developments in technology, business, and the interaction. And as
efnMOBILE workshop Delft 2017 – INTERACTING WITH THE FACADE: Lessons from everyday life in office buildings
///efnMOBIL workshop Delft 2017 – INTERACTING WITH THE FACADE: Lessons from everyday life in office buildings Students from the University of Applied Sciences Ostwestfalen-Lippe and Delft University of Technology participated in the workshop which was held at TU Delft from
efnMOBILE workshop Delft 2017 – INTERACTING WITH THE FACADE: Lessons from everyday life in office buildings
///efnMOBIL workshop Delft 2017 – INTERACTING WITH THE FACADE: Lessons from everyday life in office buildings Students from the University of Applied Sciences Ostwestfalen-Lippe and Delft University of Technology participated in the workshop which was held at TU Delft from
The Table 02
/// The Table 02 The concurrence of a video contest, and the assignment to design an innovative solution; the students and alamir worked on documenting the process as a summary of a researcher’s day at Technical University Darmstadt. The video
The Table 02
/// The Table 02 The concurrence of a video contest, and the assignment to design an innovative solution; the students and alamir worked on documenting the process as a summary of a researcher’s day at Technical University Darmstadt. The video
The Table 01
/// The Table 01 An idea to work on an innovative, simple solution to support table plate. Alamir Mohsen with a group of students worked on a parametric solution that considered the load conditions that will be subjected to the table. Then
The Table 01
/// The Table 01 An idea to work on an innovative, simple solution to support table plate. Alamir Mohsen with a group of students worked on a parametric solution that considered the load conditions that will be subjected to the table. Then
Advancing the manufacture of complex GFRC for today’s building envelopes
///Advancing the manufacture of complex GFRC for today’s building envelopes Thin-walled glass fiber reinforced concrete (GFRC) panels are being used as the primary cladding material on many landmark buildings, especially in the last decade. GFRC is an ideal material for
Advancing the manufacture of complex GFRC for today’s building envelopes
///Advancing the manufacture of complex GFRC for today’s building envelopes Thin-walled glass fiber reinforced concrete (GFRC) panels are being used as the primary cladding material on many landmark buildings, especially in the last decade. GFRC is an ideal material for
Facade Research Group Meeting 6/2017 in Delft
///Facade Research Group Meeting 6/2017 in Delft Being quite international and not entirely located in Delft, the members of the Façade Research Group of the TU Delft do meet twice per year – to discuss the content and status of
Facade Research Group Meeting 6/2017 in Delft
///Facade Research Group Meeting 6/2017 in Delft Being quite international and not entirely located in Delft, the members of the Façade Research Group of the TU Delft do meet twice per year – to discuss the content and status of
facadeworld 