/// Textile Form-work
The aim for this project was to prepare bearing structure node made of concrete, which serves as support element for a table.
Three bars should carry the table plate as a legs. The concrete rods placed at 120° toward each other. The radius for the element as a whole should be around 40 cm. Each bar has a diameter of 10 cm. The overall height is about 115 cm.
The formwork made of textile. The connecting point between the bars preferred to be placed at low position to avoid cracks and breakage. The node should not be casted as individual segments, in order to keep a uniform surface for the finished sample.
facadeworld 