Posts Tagged: 3d printing

BE-AM 2019 Symposium Registration

///BE-AM 2019 Symposium Registration BE-AM | Built Environment – Additive Manufacturing: 2019 symposium for additive manufacturing in the built environment! We are pleased to open the registration for the. For the first time, the symposium will take place this year

BE-AM 2019 Symposium Registration

///BE-AM 2019 Symposium Registration BE-AM | Built Environment – Additive Manufacturing: 2019 symposium for additive manufacturing in the built environment! We are pleased to open the registration for the. For the first time, the symposium will take place this year

AE+T Blog

///AE+T Blog AE+T – the Department Architectural Engineering and Technology at TU Delft, Faculty of Architecture and the Built Environment, now runs a blog – to announce activities, events, and results of the department and to create a community of

AE+T Blog

///AE+T Blog AE+T – the Department Architectural Engineering and Technology at TU Delft, Faculty of Architecture and the Built Environment, now runs a blog – to announce activities, events, and results of the department and to create a community of

WORLDS FIRST 3-D-Printed Bridge MIDAIR Across FLOWING WATER

///WORLDS FIRST 3-D-Printed Bridge MIDAIR Across FLOWING WATER The institute for steel structures and the Institute for Structural Mechanic and Design at Technische Universität Darmstadt are in progress to do a first 3D printed steel bridge across flowing water, using

WORLDS FIRST 3-D-Printed Bridge MIDAIR Across FLOWING WATER

///WORLDS FIRST 3-D-Printed Bridge MIDAIR Across FLOWING WATER The institute for steel structures and the Institute for Structural Mechanic and Design at Technische Universität Darmstadt are in progress to do a first 3D printed steel bridge across flowing water, using

BE-AM 2019

/// BE-AM 2019 On November 20, 2019, the symposium BE-AM | Built Environment – Additive Manufacturing will take place at the FormNext, the largest trade far for additive manufacturing in Frankfurt. For the fifth time, Prof. Dr.-Ing. Ulrich Knaack (Institute

BE-AM 2019

/// BE-AM 2019 On November 20, 2019, the symposium BE-AM | Built Environment – Additive Manufacturing will take place at the FormNext, the largest trade far for additive manufacturing in Frankfurt. For the fifth time, Prof. Dr.-Ing. Ulrich Knaack (Institute

Lithium Architects GmbH

/// Lithium Architects GmbH Lithium Architects GmbH was founded in September 2018 as an Architectural and Façade consultant. Lithium Architects GmbH is a group of Architects, Engineers, and Researchers, who are dedicated to develop construction solutions for classic and complex

Lithium Architects GmbH

/// Lithium Architects GmbH Lithium Architects GmbH was founded in September 2018 as an Architectural and Façade consultant. Lithium Architects GmbH is a group of Architects, Engineers, and Researchers, who are dedicated to develop construction solutions for classic and complex

JFDE featuring Applied Practice papers

///JFDE featuring Applied Practice papers The Journal of Façade Design and Engineering – JFDE is now featuring a new section called ‘Applied Practice’. In this section, we will publish high-quality contributions on façade projects – demonstrating novel building technologies, design

JFDE featuring Applied Practice papers

///JFDE featuring Applied Practice papers The Journal of Façade Design and Engineering – JFDE is now featuring a new section called ‘Applied Practice’. In this section, we will publish high-quality contributions on façade projects – demonstrating novel building technologies, design

BuildingAM

///BuildingAM Building Am supports the connection between the building industry and futuristic technologies, such as Additive manufacturing. The Network adopts the idea of finding individual solutions for highly complex architecture problems at any scale. the generated solutions have to fulfill

BuildingAM

///BuildingAM Building Am supports the connection between the building industry and futuristic technologies, such as Additive manufacturing. The Network adopts the idea of finding individual solutions for highly complex architecture problems at any scale. the generated solutions have to fulfill

PowerSkin Conference

/// PowerSkin Conference Date: 17.01.2019 @ Bau München PowerSkin aims to bridge between academic facade research and corporate R&D but also between research and practice. Latest facade research is presented with an international panel of speakers. PowerSkin 2019 is addressing environment,

PowerSkin Conference

/// PowerSkin Conference Date: 17.01.2019 @ Bau München PowerSkin aims to bridge between academic facade research and corporate R&D but also between research and practice. Latest facade research is presented with an international panel of speakers. PowerSkin 2019 is addressing environment,

Investigation of the potential of additively manufactured Functionally Graded Materials for façade design

/// Investigation of the potential of additively manufactured Functionally Graded Materials for façade design RESEARCH INFORMATION Researcher: Adam Pajonk Tutors: Prof. Dr.-Ing. Ulrich Knaack Prof. Dipl.-Ing. Ulrich Blum M.Arch Start: 2018 Chair: Architecture and The Built Environment, [A+BE]    

Investigation of the potential of additively manufactured Functionally Graded Materials for façade design

/// Investigation of the potential of additively manufactured Functionally Graded Materials for façade design RESEARCH INFORMATION Researcher: Adam Pajonk Tutors: Prof. Dr.-Ing. Ulrich Knaack Prof. Dipl.-Ing. Ulrich Blum M.Arch Start: 2018 Chair: Architecture and The Built Environment, [A+BE]    

Visions – Glass technology Live – the Hub @ Glasstec 2018

///Visions – Glass technology Live – the Hub @ Glasstec 2018 All about the current status of glass engineering, design and construction: to document the innovations and designs of the Glass Technology Live exhibition of the Glasstec 2018, the book

Visions – Glass technology Live – the Hub @ Glasstec 2018

///Visions – Glass technology Live – the Hub @ Glasstec 2018 All about the current status of glass engineering, design and construction: to document the innovations and designs of the Glass Technology Live exhibition of the Glasstec 2018, the book

Clone of a Monument – a copy of the Mauritshuis Den Haag

///Clone of a Monument – a copy of the Mauritshuis Den Haag Sponsored by the Dutch research agency NWO a part of the prominent Dutch museum Mauritzhuis was scanned and 3D printed – to explore the potential of the additive

Clone of a Monument – a copy of the Mauritshuis Den Haag

///Clone of a Monument – a copy of the Mauritshuis Den Haag Sponsored by the Dutch research agency NWO a part of the prominent Dutch museum Mauritzhuis was scanned and 3D printed – to explore the potential of the additive

Architectural Façade + Product research group @ Royal Art in Copenhagen

///Architectural Façade + Product research group @ Royal Art in Copenhagen Twice a year the Architectural Façade + Product research group meets abroad to discuss and develop the research topics and Ph.D. projects of the members. On invitation of Professor

Architectural Façade + Product research group @ Royal Art in Copenhagen

///Architectural Façade + Product research group @ Royal Art in Copenhagen Twice a year the Architectural Façade + Product research group meets abroad to discuss and develop the research topics and Ph.D. projects of the members. On invitation of Professor

Glass Technology Live @ GlassTec 2018

///Glass Technology Live @ GlassTec 2018 Powered by the network of the 4 technical universities of Darmstadt, Delft Dresden and Dortmund this event was showing a condensed snapshot of the current technical development and the future opportunities to us the

Glass Technology Live @ GlassTec 2018

///Glass Technology Live @ GlassTec 2018 Powered by the network of the 4 technical universities of Darmstadt, Delft Dresden and Dortmund this event was showing a condensed snapshot of the current technical development and the future opportunities to us the

FET @ TU Darmstadt

/// Future Engineering Talks Each semester, future engineering talks are held in TU Darmstadt. the idea is to fill the gap between research and praxis and to give the students and the attendees an overview of the last developments in

FET @ TU Darmstadt

/// Future Engineering Talks Each semester, future engineering talks are held in TU Darmstadt. the idea is to fill the gap between research and praxis and to give the students and the attendees an overview of the last developments in

ISM+D @ TU Delft

///ISM+D @ TU Delft The Institute for Structural Mechanics + design visited for the annual Ph.D. seminar this year the TU Delft / Faculty of Architecture and the Built Environment. The teams form the 3 professors Jens Schneider, Stefan Kolling,

ISM+D @ TU Delft

///ISM+D @ TU Delft The Institute for Structural Mechanics + design visited for the annual Ph.D. seminar this year the TU Delft / Faculty of Architecture and the Built Environment. The teams form the 3 professors Jens Schneider, Stefan Kolling,

BE-AM Symposium Additive Manufacturing

///BE-AM Symposium Additive Manufacturing  Registration for BE-AM Symposium Additive Manufacturing in Building Environment is now open. Speakers as Alban Mallet / XTREEE (FR), Wessel van Beeredonk / Studio Rap (NL), Foteini Setaki / The New Raw (FR), Kare Stokholm Poulsgaard

BE-AM Symposium Additive Manufacturing

///BE-AM Symposium Additive Manufacturing  Registration for BE-AM Symposium Additive Manufacturing in Building Environment is now open. Speakers as Alban Mallet / XTREEE (FR), Wessel van Beeredonk / Studio Rap (NL), Foteini Setaki / The New Raw (FR), Kare Stokholm Poulsgaard

New established subprogram “Structural Glass and Facade Constructions” at TU Darmstadt

///New established subprogram “Structural Glass and Facade Constructions” at TU Darmstadt As part of the civil engineering MSc program, the Institute for Structural Mechanics and Design (ISM+D) at TU Darmstadt launched a sub-track “Structural Glass and Facade Constructions”. Being linked

New established subprogram “Structural Glass and Facade Constructions” at TU Darmstadt

///New established subprogram “Structural Glass and Facade Constructions” at TU Darmstadt As part of the civil engineering MSc program, the Institute for Structural Mechanics and Design (ISM+D) at TU Darmstadt launched a sub-track “Structural Glass and Facade Constructions”. Being linked

Wire-Arc Additive Manufacturing (WAAM)

///Wire-Arc Additive Manufacturing (WAAM) Wire Arc Additive Manufacturing (WAAM) combines standard welding equipment (A power source, A Welding Torch, and a Wire feed) with controlled motion; usually achieved through robotics or Computer Numerical Control (CNC) systems, allowing for the controlled

Wire-Arc Additive Manufacturing (WAAM)

///Wire-Arc Additive Manufacturing (WAAM) Wire Arc Additive Manufacturing (WAAM) combines standard welding equipment (A power source, A Welding Torch, and a Wire feed) with controlled motion; usually achieved through robotics or Computer Numerical Control (CNC) systems, allowing for the controlled

3-D Clay printing

///3-D Clay printing Dennis de Witte, M.Sc. Technical University Darmstadt Institute of Structural Mechanics and Design  

3-D Clay printing

///3-D Clay printing Dennis de Witte, M.Sc. Technical University Darmstadt Institute of Structural Mechanics and Design  

Ph.D. Call AM Wood

/// Ph.D. Call AM Wood  This is a call for application for the theme additive manufacturing of wood. Yes the technology is not yet developed. However, some ideas are developed but we do not have a final proven technology. But

Ph.D. Call AM Wood

/// Ph.D. Call AM Wood  This is a call for application for the theme additive manufacturing of wood. Yes the technology is not yet developed. However, some ideas are developed but we do not have a final proven technology. But

Material Xperience Exhibition | 13-15. March in Rotterdam

///  Material Xperience Exhibition | 13-15. March in Rotterdam Curated exhibition and lectures: Discover at Material Xperience innovative and inspiring materials from the independent Materia collection, innovations from selected partners, new and technologies and applications. Next to themes around interior,

Material Xperience Exhibition | 13-15. March in Rotterdam

///  Material Xperience Exhibition | 13-15. March in Rotterdam Curated exhibition and lectures: Discover at Material Xperience innovative and inspiring materials from the independent Materia collection, innovations from selected partners, new and technologies and applications. Next to themes around interior,

SYMPOSIUM ‘3D-PRINTED ARCHITECTURE’

/// SYMPOSIUM ‘3D-PRINTED ARCHITECTURE’ the symposium will take place on 6. March 2018 from 14:00 till 19:00 o’clock in technical university Munich in Vorhoelzer Forum. there will be a variety of speakers from different branches; such as Architecture, industry, and research, and

SYMPOSIUM ‘3D-PRINTED ARCHITECTURE’

/// SYMPOSIUM ‘3D-PRINTED ARCHITECTURE’ the symposium will take place on 6. March 2018 from 14:00 till 19:00 o’clock in technical university Munich in Vorhoelzer Forum. there will be a variety of speakers from different branches; such as Architecture, industry, and research, and

Additive Manufacturing with glass for applications in the built environment

///Additive Manufacturing with glass for applications in the built environment Robert Akerboom, MSc. Teschnische Universität Darmstadt Institute of Structural Mechanics and Design

Additive Manufacturing with glass for applications in the built environment

///Additive Manufacturing with glass for applications in the built environment Robert Akerboom, MSc. Teschnische Universität Darmstadt Institute of Structural Mechanics and Design

Robotic Wire-Arc Additive Manufacturing (W.A.A.M) in Construction

///Robotic Wire-Arc Additive Manufacturing (W.A.A.M) in Construction Ir. Chris Borg Costanzi.Msc Teschnische Universität Darmstadt Institute of Structural Mechanics and Design

Robotic Wire-Arc Additive Manufacturing (W.A.A.M) in Construction

///Robotic Wire-Arc Additive Manufacturing (W.A.A.M) in Construction Ir. Chris Borg Costanzi.Msc Teschnische Universität Darmstadt Institute of Structural Mechanics and Design

Imagine Books now open access available!

/// Imagine Books now open access available! The full Imagine series is now available as open access download from BK BOOKS. Imagine is a series of publications that investigates technology and material development to provide architects and designers with ideas for

Imagine Books now open access available!

/// Imagine Books now open access available! The full Imagine series is now available as open access download from BK BOOKS. Imagine is a series of publications that investigates technology and material development to provide architects and designers with ideas for